16 124 818 livres à l’intérieur 175 langues
2 047 051 livres numériques à l’intérieur 101 langues
Cela ne vous convient pas ? Aucun souci à se faire ! Vous pouvez renvoyer le produit dans les 30 jours
Impossible de faire fausse route avec un bon d’achat. Le destinataire du cadeau peut choisir ce qu'il veut parmi notre sélection.
Politique de retour sous 30 jours
In this thesis, analytical, CFD and some experimental studies of microchannel heat sink (MHS) were performed. This thesis develops a closed-loop single-phase microchannel cooling system using de- ionized water as a coolant fluid for high heat flux integrated circuits. The design, fabrication and closed-loop system using MHS, pump, filter and heat exchanger is summarized. A Ni-Cr wire heat source is fabricated as a heater. A copper heat exchanger is designed to dissipate heat from the heated fluid coming out of the MHS. Some experiments were performed in the fabrication of microchannels on a (110) wafer. After the fabrication, MHS was bonded with BOROFLOAT® Glass. The parameters in this study include variable flow rates of coolant and power densities of heat source with uniform wall thickness and channel width of the microchannel heat sink.